[HEM09] – 3-in-1 Multi-drive Emergency + main driver + Sensor-DIM (30W)

Categories: LED Drivers, Sensors Tags: Drivers, Sensor

Description
Product specifications
Wiring diagram
Applications
Folder

Product Information

HEM09 is a smart integration of microwave motion sensor, multiple current selection LED driver and multiple wattage emergency LED driver for cost-optimised lighting solutions. Save space, save cost, save wiring, save assembly and save trouble!

Some of the product highlights include:

Flicker-free dimming from 100%~30%
Multi Constant current selection
1-10V & switch-Dim dimming
Further 20% saving @ initial 10,000 hrs
Automatic output reduction 80%–60%–40% against overheat
Max. load for 180min: 3W / 4W / 6W / 8W @ 10-60V
Over-heat and over-load protection
Self testing, buzzer indication
Hand-held remote control
Tri-level sensorDIM motion detection antenna (optional)

Mechanical Structure

Specifications

Mains voltage	220~240VAC
Mains frequency	50/60Hz
Mains power	37W
Mains current	0.2~0.15A
Output voltage (U-out Max.)	70 VDC
Output LED Current	21W , 350mA, 10-60V \| 30W , 500mA , 10~60V \| 30W , 550mA , 10~55V \| 30W , 700mA , 10~43V \| 30W , 750mA , 10~40V \| 23W , 900mA , 10~25V
Power Factor	0.95
Operation Temperature	Ta:0~+50℃ Tc: 80℃
Max Output power for Emergency LED Driver	8W
Output voltage(U-out max.) for emergency LED driver	60 VDC
Battery charge current	100-140mA \| 160-200mA
Battery pack	[ BPC05\| BPC08 \| BPC14 \| BPC19 \| BPC20 \| BPC21 ]
Charge period	24 hours or 32 hours
Max. case temp.	80℃
Battery duration	3 hours for [ 3 \| 4 \| 6 \| 8 ] W
Mains Switch-over voltage range	150VAC~180VAC
Over-heat Protection	Over-heat protection with auto-reset
Dielectric Strength	Input to output: 1750VAC
EMC Standard	EN55015:2007 version EN61547
Safety Standard	EN50172 \| EN61347-2-7 \|EN61347-2-13 \| IEC62034 \| BS5266
IP Grade	IP20
Certifications	Semko, CB, CE , EMC