[HED6045] – Constant Current DALI LED Driver (45 W)
16 October 2018
[HEM02] – Emergency LED Driver
16 October 2018
[HED6060] – Constant Current DALI LED Driver (60 W)
Product Introduction
HED6060 is a constant current Dali LED driver. It also offer other dimming options like 1-10V dimming and Switch-Dim. It has a built in DIP switch which allows easy multiple LED current selection options. Some of the product highlights are:
- Standby power < 0.5W
- Automatic output reduction 80%–60%–40% against overheat
- Failure DALI feedback
- Flicker-free dimming from 100%~30%
- In compliance with DALI 2 standard.
- DALI and switch-Dim can be used at the same time.
Mechanical Structure
Specifications
| Mains voltage | 220~240VAC |
| Mains frequency | 50/60Hz |
| Mains current | 0.35~0.27A |
| Output voltage (U-out Max.) | 80VDC |
| Output LED Current | Output LED voltage | (Max.) Output LED power | 1.05A, 12-53V , 55W | 1.2A, 12-50V, 60W | 1.4A, 12-43V, 60W |1.6A, 12-38V, 60W |1.75A, 12-35V, 60W |2.0A, 12-30V, 60W | 2.1A, 12-28V, 60W |
| Dimming Range | 1~30% - PWM dimming 30~100% - analogue dimming. |
| Stand-by power | <0.5W |
| Power Factor | ≥0.95 |
| Operation Temperature | Ta: -20~+45℃ Tc:+75℃ |
| Dimming interface | DALI, Switch-Dim, 1-10V |
| Abnormal protection | Output short-circuit protection with auto-reset |
| Over-heat Protection | Over-heat protection with auto-reset |
| Dielectric Strength | Input to output: 3750VAC |
| EMC Standard | EN55015:2007 version EN61547 , EN61000-3-2/3 |
| Safety Standard | EN61347-1| EN61347-2-13 | EN60598-1 |
| DALI standard | IEC62386-101:2009 | IEC62386-102:2009 | IEC62386-207:2009 |
| Max Efficiency | 89% |
| IP Grade | IP20 |
| Certifications | Semko, CE , EMC, SAA |
