[HED2050-A] – Constant Current DALI LED Driver (1*50W)
16 October 2018
[HED2060-A2] – Constant Current & Voltage DALI LED Driver (2*30W)
16 October 2018
[HED2060-A] – Constant Current & Voltage DALI LED Driver (1*60W)
Product Introduction
HED2060-A is a constant current & voltage Dali LED driver. Dali dimming also works with Switch-Dim option.It has a built in DIP switch which allows easy multiple LED current and voltage selection options. Some of the product highlights are :
- Automatic output reduction 80%–60%–40% against overheat
- Failure DALI feedback
- Flicker-free dimming from 100%~30%
- In compliance with DALI 2 standard
- DALI and switch-Dim can be used at the same time
Mechanical Structure
Specifications
| Mains voltage | 220~240VAC |
| Mains frequency | 50/60Hz |
| Mains current | 0.35~0.27A |
| Output voltage (U-out Max.) | 80V |
| Output LED Current | Output LED voltage | (Max.) Output LED power | 1.05A, 53V , 55W | 1.2A, 50V, 60W | 1.4A, 43V, 60W | 1.6A, 38V, 60W | 1.75A, 35V, 60W | 2.0A, 30V, 60W | 2.1A, 28V, 60W |
| Power Factor | ≥0.95 |
| Operation Temperature | Ta: -20~+45℃ Tc:+80℃ |
| Dimming interface | DALI, Switch-Dim |
| Abnormal protection | Output short-circuit protection with auto-reset |
| Over-heat Protection | Over-heat protection with auto-reset |
| Dielectric Strength | Input to output: 3750VAC |
| EMC Standard | EN55015:2007 version EN61547 , EN61000-3-2/3 |
| Safety Standard | EN61347-1| EN61347-2-13 | EN60598-1 |
| DALI standard | IEC62386-101:2009 | IEC62386-102:2009 | IEC62386-207:2009 |
| Max Efficiency | 85% (Max.) |
| IP Grade | IP20 |
| Certifications | Semko, CE , EMC, SAA |
