[HED1025] – Constant Current Omni Drive – DALI + SensorDIM + Switch-Dim.+ 1-10V + RF (1*25W)
11 October 2018
[HED1050H] – Constant Current Omni Drive – DALI + SensorDIM + Switch-Dim.+ 1-10V + RF (1*50W) – High Current
11 October 2018
[HED1045] – Constant Current Omni Drive – DALI + SensorDIM + Switch-Dim.+ 1-10V + RF (1*45W)
Product Introduction
HED1045 is a DALI + sensorDIM + 1-10V + switch-Dim. + RF wireless, multi-current LED driver! This Hex-Drive is a multi-task hex-functional LED driver. Save space, save cost, save wiring, save assembly, save inventory and save trouble!
Some of the product highlights include:
- Standby power < 0.5W
- Automatic output reduction 80%–60%–40% against overheat
- Failure DALI feedback
- Flicker-free dimming from 100%~30%
- In compliance with DALI 2 standard.
- DALI and switch-Dim can be used at the same time.
There is a multiple current selection option thanks to the built in DIP Switch in the driver.
Mechanical Structure
Specifications
| Mains voltage | 220~240VAC |
| Mains frequency | 50/60Hz |
| Mains current | 0.22~0.2A |
| Output LED Current | Output LED voltage | (Max.) Output LED power | 28W, 500mA, 12~56V | 40W, 700mA, 12~56V | 45W, 900mA, 12~50V | 45W, 1050mA, 12~42V | 40W, 1200mA, 12~34V| 40W, 1400mA, 12~28V |
| Dimming Range | 1~30% PWM dimming | 30~100% analoge dimming. |
| Min. output voltage | 12 V |
| Stand-by power | <0.5W |
| Power Factor | 0.95 |
| Operation Temperature | Ta: -20~+50℃ Tc:+80℃ |
| Dimming interface | DALI, Switch-Dim., 1-10V |
| Abnormal protection | Output short-circuit protection with auto-reset |
| Over-heat Protection | Over-heat protection with auto-reset |
| Dielectric Strength | Input to output: 3750VAC |
| EMC Standard | EN55015:2007 version EN61547 |
| Safety Standard | EN50172 | EN61347-2-7 |EN61347-2-13 | IEC62034 | BS5266 |
| DALI standard | IEC62386 -102,207 |
| Max Efficiency | 87% |
| IP Grade | IP20 |
| Certifications | Semko,CB, CE , EMC, SAA |
