[HED1025] – Constant Current Omni Drive – DALI + SensorDIM + Switch-Dim.+ 1-10V + RF (1*25W)

Categories: LED Drivers, Sensors Tags: Drivers, Sensor

Description
Product specifications
Wiring diagram
Applications
Folder

Product Introduction

HED1025 is a DALI + sensorDIM + 1-10V + switch-Dim. + RF wireless, multi-current LED driver! This Hex-Drive is a multi-task hex-functional LED driver. Save space, save cost, save wiring, save assembly, save inventory and save trouble!

Some of the product highlights include:

Standby power < 0.5W
Automatic output reduction 80%–60%–40% against overheat
Failure DALI feedback
Flicker-free dimming from 100%~30%
In compliance with DALI 2 standard.
DALI and switch-Dim can be used at the same time.

There is a multiple current selection option thanks to the built in DIP Switch in the driver.

Mechanical Structure

Specifications

Mains voltage	220~240VAC
Mains frequency	50/60Hz
Mains current	0.15~0.13A
Output (Power \| Current \| Voltage)	19.5W , 325mA, 12~60V \| 21W, 350mA, 12~60V \| 22.5W, 375mA, 12~60V \| 24W , 400mA , 12~60V \| 25.5W, 425mA , 12~60V \| 27W , 450mA, 12~60V \| 26W , 475mA, 12~55V \| 27.5W, 500mA , 12~55V \| 26W , 525mA, 12~50V \| 27.5W, 550mA, 12~50V \| 26W, 575mA , 12~45 \| 27W, 600mA, 12~45V \| 28W, 625mA, 12~45V \| 28W, 650mA, 12~43V \| 27W, 675mA, 12-40V \| 28W, 700mA, 12-40V
Dimming Range	1~30% PWM dimming \| 30~100% analoge dimming.
Min. output voltage	12 V
Power Factor	0.9
Operation Temperature	Ta: -20~+50℃ Tc:+80℃
Dimming interface	DALI, Switch-Dim., 1-10V
Abnormal protection	Output short-circuit protection with auto-reset
Over-heat Protection	Over-heat protection with auto-reset
Dielectric Strength	Input to output: 3750VAC
EMC Standard	EN55015:2007 version EN61547
Safety Standard	EN50172 \| EN61347-2-7 \|EN61347-2-13 \| IEC62034 \| BS5266
DALI standard	IEC62386 -102,207
Max Efficiency	86%
IP Grade	IP20
Certifications	Semko,CB, CE , EMC, SAA