[HCD402] – DALI Sensor Flush Mounting Installation
20 October 2018
[HCD418] DALI Sensor Independent Version
21 October 2018
[HCD405RC with HRC-02 ] – DALI Sensor
Product Introduction
HCD405RC with HRC-02 is a DALI sensor is designed for built-in lighting fixture, to be incorporating into the DALI system, taking command from the DALI master, accepting and carrying out the grouping work ,switching on/off or dimming the assigned group members, and feedback the status to the DALI master.
With the rotary coding switch, it is easy to add in this sensor into the existing DALI system, and do the grouping work without the help of the DALI master and computer interface.
Mechanical Structure
Specifications
| Operating voltage (Dali Power Supply) | 9.5~22.5 Vdc |
| Input current | 12mA |
| Group Selection | 16 groups via rotary switch |
| Detection area |
[ 50 | 100 ] % [10 | 50 | 75 | 100 ] % on RC |
| Warmming-up time | 20s |
| Hold time |
[ 3 | 10 ] min 2s |30s | 1min |5min |10min | 20min | 30 min on RC |
| Daylight threshold |
2 Lux | disable [ 2 | 10 | 30 | 50 ]Lux | Disable |
| Standby period |
[ 0s | 10min | 1H | +infinity 0s | 10s |1min | 5min | 10min | 30min | 1H |+ infinity |
| Standby dimming level |
[ 10 | 50 ] % [ 5 | 10 | 20 | 50 ]%, |
| Microwave frequency | 5.8GHz+/-75MHz |
| Microwave power | <0.1mW |
| Detection range | Max.(O x H):12m x 6m; where O is the detection angle |
| Detection angle | 30~150 Degrees |
| Mounting height | 6m |
| Operating temperature | -20~ +60 Degree Celsius |
| IP rating | IP20 | IP65 only when used with Hytronik HC-IP65 |
| Certification | Semko, CB, EMC, CE, R&TTE, SAA |
