[HC502SDC] – Dry Contact Sensor Flush Mounting Version
20 October 2018
[HCD405RC with HRC-02 ] – DALI Sensor
20 October 2018
[HCD402] – DALI Sensor Flush Mounting Installation
Product Introduction
HCD402 is a Dali sensor and uses the latest DALI protocol. Dali group configuration can be done either on PC or on the rotary switch which offers 16 different channels. It also has 3 step dimming control.
Mechanical Structure
Specifications
| Operating voltage | 9.5~22.5 VDC |
| Input current | 10mA |
| Group Selection | 16 groups via rotary switch |
| Detection area | [50 | 100 ]% |
| Hold time | Test |1min |5min |20min |
| Daylight threshold | 2~50Lux | Disable |
| Standby period | 0s | 10s | 5min | 10min | 30min | 1h/+ |
| Standby dimming level | [ 5 | 10 | 20 | 50 ]%, |
| Microwave frequency | 5.8GHz+/-75MHz |
| Microwave power | <0.2mW |
| Detection range | Max.(O x H):12m x 6m; where O is the detection angle |
| Detection angle | 30~150 Degrees |
| Mounting height | Max.6m |
| Operating temperature | -35 ~ +70 Degree Celsius |
| IP rating | IP20 | IP65 only when used with Hytronik HC-IP 65 |
| Certification | EMC, CE, R&TTE, SAA |
