[HC019V / EXT] – False Ceiling Version Condominium Control
18 October 2018
[HC020SDC] – Dry Contact Sensor Alternating Version
19 October 2018
[HC019V] – Advanced Version Condominium Control
Product Introduction
In many cases, several sensors are connected together to control the same fixture, or to trigger on each other, the sudden on/off of the lamp
tube causes huge magnetic pulse, which may mis-trigger the sensor. Hytronik condominium sensor HC019V employed a strong software to
overcome that magnetic interference and is specially designed for that application with 1-10 V dimming control.
Mechanical Structure
Specifications
| Operating voltage | 220~240VAC |
| Max. Switched power | 800W - Capacitive Load |
| Standby power | <1W |
| Detection area | [10| 50 |75 |100 ]%, |
| Warmming-up time | 20s |
| Hold time | 5s |30s |1min |5min |10min |20min | 30min |
| Daylight threshold | 2~50Lux, disable |
| Standby period | 0s | 10s |1min | 5min | 10min |30min |1h | + infinity |
| Standby dimming level | [ 10 | 20 | 30 | 50 ] % |
| Sensor principle | Microwave motion detector |
| Microwave frequency | 5.8GHz+/-75MHz |
| Microwave power | <0.2mW |
| Detection range | Max. (oxH): 12m x 6m; where o is the detection angle |
| Detection angle | 30~150 Degrees |
| Mounting height | Max.6m |
| Operating temperature | -35 ~ +70 Degree Celsius |
| IP rating | IP20 | IP65 only when used with Hytronik HC-IP65 |
| Certification | Semko, CB, EMC, CE, R&TTE, SAA |
