HEC9025 is a Sensor+driver, 2 in 1. save space. save assembly work, hassle-free and cost effective! This is a smart integration of microwave motion sensor and multiple current selection LED driver. With the help of detached sensor antenna, it requires very little space on the LED panel, and gives pre-selected constant current to drive the LEDs to work based on movement detection. After the hold-time, it dims the light to pre-set dimming level, and eventually turns it off in long absence.
Mains voltage | 220~240VAC |
(Max.) Input power | 31W |
Warm time | 20s |
Detection area | Sensor [ OFF | 50 | 75 |100 ] % |
Hold time | [ 5s| 30s | 1min | 5min | 10min | 20min|30min ] |
Daylight threshold | [2 |10 | 50 | disable ] LUX |
Standby period | [ 0s| 10s | 1min | 5min | 10min |30min | 1H | + infinity ] |
Standby dimming level | [ 10 | 20 | 30 | 50 ] % |
Microwave frequency | 5.8GHz+/-75MHz |
Microwave power | <0.2mw |
Detection range | Max. (oxH): 12m x 6m; where o is the detection angle |
Detection angle | 30~150 Degree |
Max. Mounting height | 6m |
Output LED Current | Output LED voltage | (Max.) Output LED power | 350mA,10-43V, 3.5-21W | 500mA,10-42V, 5-21W | 550mA,10-40V, 5.5-22W |700mA,10-36V, 7-25W | 750mA,10-34V, 5.5-25W | 900mA,10-28V, 9-25W |
Empty load voltage | 75V |
Power Factor | ≥0.96 |
Operation Temperature | -20 ~ +50 Degree Celsius TC:75 Degree Celsius |
Abnormal protection | Output short-circuit protection with auto-reset |
Dielectric Strength | Input to output: 3750VAC | 5mA | 1min |
EMC Standard | EN55015:2007 version EN61547 |
Safety Standard | EN61347-1| EN61347-2-13 |
Max Efficiency | 85% |
Input current | 0.15A |
IP Grade | IP20 |
Certifications | Semko, EMC, CE, R&TTE, SAA |
Product Applications