[HD2200] – Push-type Trailing Edge Dimmer (200W)
8 October 2018
[HE1030-A] – Constant Current & Voltage Dimmable LED Driver (30W)
9 October 2018
[HE1025-1] – SensorDIM LED Driver (30 W)
Product Introduction
- This SensorDIM LED driver is specially designed to work with sensors to achieve dimming function, when receiving the signal from sensors, the driver works on full power, when the signal passes out, the driver works on pre-defined brightness (0%/10%/20%/ 30%/50%/100%, set up by different combinations of 4 DIP switches), which achieves energy saving.
- This driver has an unique benefit of output current selection, 3 DIP switches give customers 8 different current levels to choose (250mA/350mA/400mA/450mA/500mA/550mA/600mA/700mA), which current is higher than the LED rated current, the performance and life-span of LED will be greatly jeopardized. It also has an Aluminum profile filled with silicon rubber for heavy duty task, hostile thermal conditions and tough climate.
Specifications
| Product Catalog | HE1025-1 |
| Mains voltage | 220~240VAC |
| Mains frequency | 50/60Hz |
| Output voltage (U-out Max.) | 68VDC Max. |
| Output current / Voltage selection | [ 250 | 350 | 400 | 450 | 500 | 550 | 600 | 700 ] mA |
| Power Factor | ≥0.9 |
| Operation Temperature | -20℃ - +50℃ |
| Short-circuit Protection | Enabled with automatic reset |
| Over-heat Protection | Enabled with automatic reset |
| Dielectric Strength |
Input to output: 2250 VAC | 5mA | 1min Input to casing: 1800 VAC | 5mA | 1min Output to casing: 500 VAC | 5mA | 1min |
| EMC Standard | EN55015:2007 version EN61547 |
| Safety Standard | EN61347-2-13 |
| Max Efficiency | 85% |
| Input current | 164~150mA |
| Pre-defined dimming level | [ 0 | 10 | 20 | 30 | 50 | 100 ] % |
| Empty load power consumption | ≤1.6W |
| Certifications | Semko, CE, CB |
