[HC009SDC] – Dry Contact Version Standard Version
18 October 2018
[HC018V / EXT] – False Ceiling Version Tri- Level Dimming Control
18 October 2018
[HC011D/EXT] – PWM Dimming Control Version
Product Introduction
Thanks to our worldwide patented circuit, this sensor is particularly designed to work with most ordinary non-dimmable LED drivers *, Constant
Current (350mA-1050mA) and Constant Voltage ( 20-90V) , to achieve 2-steps or 3-steps dimming function,it is the most cost effective LED
dimming control for LED lighting, easy upgrading the existing non-dimmable LED fixture to automatic dimmable fixture with very little change in
the fitting construction. (*This sensor however cannot dim drivers with over-load protection circuitry. If the over-load protection is achieved by
thermal switch, then the driver has no problem to be dimmed by this motion sensor ).
In retrofit project, we can completely hide this motion sensor. Only a tiny hole is needed on the false ceiling to fix the daylight sensor. Thanks to the penetration property of microwave, motion sensor body is hidden behind the false ceiling, with the sensor antenna faces downwards.
Mechanical Structure
| Operating voltage | 20~90VDC |
| Input current | 350mA ~1050mA |
| Max. Switched power | 100W |
| Standby power | <0.5W |
| Detection area | [10 | 25 | 50 |75 |100 ]%, |
| Hold time | 5s |30s |1min |5min |10min |30min |
| Daylight threshold | 2~50Lux [daylight | twilight |darkness] |
| Standby period | 0s | 10s | 5min | 10min | 30min |1h | + infinity |
| Standby dimming level | [ 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 ] % |
| Microwave frequency | 5.8GHz+/-75MHz |
| Microwave power | <0.2mW |
| Detection range | Max. (oxH): 12m x 6m; where o is the detection angle |
| Detection angle | 30~150 Degrees |
| Mounting height | 3m |
| Operating temperature | -20~60 Degree Celsius |
| IP rating | IP20 | IP65 only when used with Hytronik HC- IP 65 |
| Certification | Semko, EMC, CE, R&TTE, SAA |
